| BB&E is a full service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering and Program/Project Management Services to Federal and private sectors. Position Summary BB&E is currently looking for a Construction Surveillance Engineer (CSE) to support the NAVFAC Southeast (SE) Headquarters, Public Works Departments (PWD) and Resident Officer in Charge of Construction (ROICC) offices across the NAVFAC SE Area of Responsibility (AOR). This position is at Naval Air Station Whiting Field near Milton, FL. Job Duties & Responsibilities The CSE shall provide management support to the FEAD/ROICC for construction services such as construction inspection, quality assurance, monitoring ESS compliance and contract administration. The construction work includes repair, demolition, and new construction that the office executes for various commands and tenants on the installation. Work will encompass all trades that are typical for repair, demolition, and new construction projects. Specific workload will be identified upon arrival.  
 Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar itemsAttend meetings and conferences; take notes, provide information to the FEAD/ROICC or the FEAD/ROICC's representative at meetings, conferences, and briefings. Includes: preconstruction conference, safety meetings, contractor quality control (CQC) meetings, partnering meetingsProvide construction briefings and reportsProvide review of submittals designated for Government approvalProvide construction schedule review/analysis and notes/comments/recommendations on progress schedules and network diagrams, Contractor's Safety Plan, and CQC PlanMonitor construction work for project CQC compliance with the contract and Contractor submitted plansPrepare Construction Representative's Reports (CRRs) and Contract Construction Compliance Notices (CCCNs)Report instances of non-compliance with safety requirementsMonitor compliance with environmental protection requirements; monitor measurements and assurance surveying; monitor materials testingWitness testing of waste, gas, water, electrical, heating, ventilation, air conditioning, fire protection, elevator, boiler, and energy monitoring control systemsReview daily CQC and contractor production reports (CPRs); monitor the updating of Submittal Status Logs; and other required documentationWork with the CSE and FEAD/ROICC personnel to complete, together with the construction Contractor's representative, the field pay estimate worksheet for the construction contract  
 Notify FEAD/ROICC Leadership of disagreements, discrepancies, or major problemsAssist conducting pre-final inspectionsProvide advice for modification negotiationsMaintain working files; NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) will be used to manage electronic submittals and documentsPrepare an independent construction cost estimate for modifications to construction contracts; prepare, for each modification cost estimate, a narrative assessment of the impact of the proposed change on the construction Contractor's operationsProvide construction photographic and record drawing servicesPerform constructability review services; perform spot checks for completeness and accuracy of the construction plans and specifications and to determine the constructability of the facility at the beginning and duration of each phase of constructionManage requests for information (RFIs) Requirements 
 U.S. Citizenship and the ability to obtain/maintain a NACI/CAC is requiredA valid driver's license is requiredCertification: Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding; completed 30 Hour OSHA Construction Training within the past 2 years is requiredSoftware: Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera SureTrack/P3/P6 and Microsoft Project; proficiency in using computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/CostWorksStrong Communication Skills: Ability to communicate effectively, concisely, and authoritatively in English both orally and in writing. Experience in preparing correspondence, written reports, and in briefing management personnelKnowledgeExperience in developing and maintaining complex, long-term, multi-year program construction management activities including submittal and request for information (RFI) processingFamiliarity with Federal building design criteria and construction guide specificationsKnowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installationAbility to accurately calculate construction costs for changes, price the value of needed work, and provide recommendations for equitable adjustmentsAbility to monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis 
 Ability to review contractor submissions of as-built drawings for completeness and accuracy and advise in writing the appropriate Government personnel as to the acceptability of such submissionsAbility to identify critical and long lead-time materials and recommend procurement strategies to prevent negative impact on quality, cost, and scheduleConstruction technical competencies and qualifications to verify that a specific level of workmanship was obtained Experience & Education  
 Experience: A minimum of 7 years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 millionEducation: Bachelor's Degree in Engineering from an ABET accredited university; Construction Management from an ABET or ACCE accredited university; or Architecture from a NAAB accredited university OR 
 The CSE may substitute the degree requirement with an additional 5 years of experience beyond the experience requirement of a minimum of 7 years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued over $5 million Physical Requirements: To successfully perform the essential duties of this position, an individual must be able to perform the following: 
 Must be able to stand, walk, bend, stoop, crouch, crawl, navigate across uneven ground that is common at construction sites and climb for extended periods as well as when traveling to and from job sitesMust be able to lift, carry, push, and pull materials and equipment weighing up to 50 pounds regularly * Must be able to work both indoor/outdoor (with exposure to the elements) 
 Must be able to work in confined spaces and under varying environmental conditions, including heat, cold, humidity, rain, wind, dust, and noiseMust be able to wear and use required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, hearing protection, steel-toed boots, fall protection safety vests and high-visibility reflective safety vestsMust have sufficient visual and auditory acuity to perform tasks safely and effectively, including reading instruments, recognizing hazards, and communicating on active construction sitesMust be able to drive company or personal vehicles to and from field locations, sometimes multiple times per day, and may be required to work variable shifts depending on project needs Work Environment: 
 Primarily operates in an outdoor environment where various weather conditions could be encountered, depending on the location and season.May encounter extreme temperatures, airborne particles, fumes, chemicals, or loud noise.Worksites might contain high-voltage equipment, exposed wires, and other electrical hazards that will require strict adherence to safety protocols.  LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits Compensation, Benefits & Perks  
 Competitive compensation packagesParticipation in the Employee Stock Ownership Plan - BB&E is 100% employee-owned!Discretionary bonus*Medical, Dental, and Vision Insurance with health care concierge*Employer provided Short-Term & Long-Term disability*Employer provided Life insurance*Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits*Generous PTO plus 11 paid holidaysTraditional & Roth 401(k) options with fully vested employer matchTuition reimbursement & professional developmentEmployee referral programEmployee discountsEmployee Assistance Program (EAP)Pet insurance discount *Applies only to full-time employees *BB&E is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. |